All accessories are developed for specific applications during recoding events at frame rates over 1 million per second!
Accessories and applications for REL are synonymous. REL is an expert at mounting your lights (photon sources) to minimize shadowing as well as providing bleeding edge intensities in packages that conform and contort to maximize space efficiency and utility for you.
Power supplies for these photon sources allow them to operate at steady state outputs, as well as in burst modes. Control of the output and duty cycle of the lights is paramount to understand in your lighting application to select the correct power supply. REL power supplies control the level and duration of the lighting event AND protect the user from the heat generated by the inefficiencies that occur during the photon conversion and discharge event.
PS2 Power Supply
- Continuous duty power for WS3
- 600W, 120VAC @ 5 AMP
- Wired Remote
- Dimmable from zero to full power
- Fan bypass mode for noise and airflow sensitive applications
- Dimensions: 15”x7”x10”
- Weight: 22lb
PS1-Lite Power Supply
- Compact, lightweight portable, continuous duty power source for WS3
- 600 W 120VAC @ 5 AMP
- Simple On/Off control
- Dimensions: 10”x5.75”x2”
- Weight: 8lb
PS4 Power Supply
- Capacitive power supply with continuous and burst modes
- Dimmable continuous power @ 150W 120VAC
- High Power Burst of 1-2 seconds @ up to 17Kw via BNC trigger port
- Wired Remote
- Fan bypass for noise and airflow sensitive applications
- Dimensions: 28”x10”x7.75”
- Weight: 65lb
Remote Controller
- Standard handheld remote controls all REL visible light power supplies. Link multiple power supplies to a single remote for larger arrays. Controls continuous ON/OFF, Dimming and Momentary Burst modes.
- Dimensions: 3”x2”x1” (includes 12ft Cable)
20’ Extension Cable
- Extend cable length on any WS3 light module. Multiple extensions can be used together to form longer cables.
- Dimensions: 20ft x .75” Dia
50’ Extension Cable
- Extend cable length on any WS3 light module. Multiple extensions can be used together to form longer cables.
- Dimensions: 50ft x .75” Dia.
Integration Fixtures
- Adjusts focal angle of WS2 light panel
- Mounts WS2 to Universal Tripod Mount System
Mounting Carriage for WS1-K
- Integrally mount your WS1-K and camera system to REL’s SHPB base platform. This rolling carriage allows for convenient positioning and for high strain rate test events.
- Dimensions: 36”x18”x28”
- Weight: 85lb
Universal Tripod Mount System
- Support 250 pounds of lighting and camera gear.
- 90 degrees of tilt control (30 degrees back and 60 degrees forward)
- 360 degrees of pan
- Geared drive to control the tilt and pan of your camera and lighting system simultaneously.
- Integrates REL Visible spectrum Lighting solutions with a camera on a common platform
Array Connector
- Connect WS3 Modules
- Adjustable focal angle mount for the WS3 Module
REL’s WS3 packs an extraordinary amount of power & versatility into a compact, durable housing
High Intensity Lighting is used on High Strain Rate Testing Equipment